Portable Hone Machine

SNJ-10 Portable Hone
I.D. Range: 31,8 mm – 45 mm 1.250" – 1.770"
SNJ-10 Portable Hone shown assembled with Stone Set and AN-26A Drive Shank. Will hone bores up to 457 mm (18") long as shown; order additional Shaft Extensions for longer bores. Requires 13 mm (1/2") chuck capacity

SN-75 Portable Hone
I.D. Range: 44 mm – 51 mm 1.750" – 2"
SN-75 Portable Hone shown assembled with Stone Set, Drive Shank, and 305 mm (12") Shaft Extension. 102 mm (4") stone length. Will hone bores up to 533 mm (21") long as shown;order additional Shaft Extensions for longer bores. Requires 13 mm (1/2") chuck capacity.

SN-75/SNR-185
JN-95 Portable Hone
I.D. Range: 51 mm– 66 mm 2" – 2.600"
JN-95 Portable Hone shown assembled with Stone Set, Drive Shank, and 305 mm (12") Shaft Extension. 102 mm (4") stone length. Will hone bores up to 533 mm (21") long as shown; order additional Shaft Extensions for longer bores. Requires 13mm (1/2") chuck capacity

JNR-210
I.D. Range: 51 mm– 66 mm 2" – 2.600"
JNR-210 Remote-Feed Junior Hone as shown supplied, except for Stone Set,which must be ordered separately. Will hone bore lengths up to 305mm (12") as shown. Additional Shaft Extensions available for honing longer bores. Requires 13 mm (1/2") chuck capacity

JN-95/JNR-210 AN-112 Portable Hone
I.D. Range: 64 mm– 178 mm 2.5"–7"
AN-112 Portable Hone shown assembled with Stone Set, (includes 76mm (3") Drive Shank, 305mm (12") Shaft Extension, Universal Joint and Hone Head) shown. 102mm (4") stone length. Requires 13mm (1/2") chuck capacity. See page 6 for repair parts.

AN-815 Portable Hone
I.D. Range: 64 mm– 533 mm 2.5"–21" AN-815 Portable Hone (includes 152 mm (6")
Drive Shank, 305 mm (12") Shaft Extension,Universal Joint and Hone Head) shown assembled with single length master holder set and stone set. Requires 16 mm (5/8") chuck capacity for 63,5-127 mm (2.5"-5") diameter. Requires 19 mm (3/4") chuck capacity for 127-381 mm (5"-15") diameter.

Requires 25,4 mm (1") chuck capacity for larger than 381 mm (15") diameter. See page 5.8 for repair parts.

ANR-275 Wide Range Hone

I.D. Range: 64 mm– 533 mm 2.5"–21"
ANR-275 Portable Hone (includes Universal Joint, Upper Feed Assembly, Feed Clutch and Hone Head) shown assembled with Stone Support, Single Length Master Holder Set and Stone Set. 102 mm (4") stone length (203 mm [8"] when two sets of stones are used with Double Length Master Holder Set.) Requires 16 mm (5/8") chuck capacity for 63,5-127 mm (2.5"-5") diameter. Requires 19 mm (3/4") chuck capacity for 127-381 mm (5"-15") diameter. 

Requires 25,4 mm (1") chuck capacity for larger than 381 mm (15") diameter. See I-ANR-275D for repair parts and operatng instructions.

GNH Giant Portable Hone

I.D. Range: 254 mm– 1524 mm 10"–60"
GNH-1510 Hand-Feed Giant Hone shown assembled with honing stones and drive shank. Order additional shaft extensions for longer bores. All giant hones require 2 sets of W47 or WY51 stones to load the hone. (See Tables on pages 5.15-5.16 for Stone sets for GNH Hones.)

Drive Shaft Extensions
Drive motors of 2.2-3.7KW (3 to 5 HP) provide adequate torque to turn the hone. These hones may be driven by a rigidly mounted power source such as a radial drill press or a large lathe; 29 mm (1-1/8") chuck capacity is required. A second universal joint, AN-970, is needed between the machine spindle and the drive shaft to allow for full floating action of the head.

Drive Source
Select the correct Giant Hone, drive shaft extension (for bore length 304 mm [12"] or longer and universal joint, if needed).

GNR Giant Portable Hone
I.D. Range: 254 mm– 1524 mm 10"–60"
GNR-1010 Remote-Feed Giant Hone shown assembled with honing stones. Will hone bores up to 304mm (12") long as shown. Order additional drive shafts for longer bores. All giant hones require 2 sets of W47 or WY51 stones to load the hone. (See Tables on pages 5.15-5.16 for Stone sets for GNR Hones.)

The remote feed permits the operator to expand the stones at any time while the honing head is running in the bore, as well as when the hone is stopped. The operator controls the amount of stone expansion and the honing pressure by braking the feed wheel while the hone is turning. The
remote feed also permits the operator to quickly retract the stones and remove the hone from the bore when the hone is stopped.

1：15 years of experience in research and production of honing machines
2： Honing machine operating software with independent intellectual property rights
3：The motor and electrical components are sourced from European or Japanese brands
4：Reliability is recognized by the market
5：Excellent technical team
6：Excellent after-sales service team

1：Since 2010, a highly recognized honing machine manufacturer in the Chinese market.
2：We have an experienced, young, and responsible team.
3：We have an excellent technical team. We are proud of our products.
4：Quality assurance! Before delivering to the customer, the factory's quality supervision department strictly controls the quality.
5：Customize special honing machines and tools according to customer needs for honing special workpieces.

Hot Tags: portable hone machine, China portable hone machine manufacturers, Honing Oil, Honing Head, Portable Hone Machine, Honing Tools, Diamond Honging Stone, Honing Fluids