Mining Machinery Industry Application

Mining machinery uses hydraulic cylinders in roof supports, excavators, underground equipment and other heavy-duty systems. These cylinders work under high hydraulic pressure, repeated movement and heavy loads. The internal bore must maintain stable geometry and surface quality so the piston, seals and hydraulic system can operate properly.

At Liruite Automation Equipment, we develop honing machines for hydraulic cylinders and deep-hole components used in mining machinery. Our equipment covers standard CNC horizontal honing, hydraulic honing, long-stroke honing, large-bore honing and customized configurations.

For mining cylinder manufacturers, the machine selection starts with the actual workpiece: bore diameter, honing depth, cylinder length, material, weight, tolerance and production volume.

 

Mining Machinery Honing Requirements

Mining hydraulic cylinders are different from small industrial cylinders. The workpieces can have large bores, long strokes and high-strength steel construction.

Liruite's published mining machinery application range is:

Parameter

Typical Mining Machinery Range

Bore Diameter

Φ63–Φ890 mm

Stroke Length

300–8000 mm

Load Capacity

0.1–20 t

Material

High-strength alloy steel

Main Applications

Hydraulic supports, mining equipment cylinders, underground machinery

For large-bore mining applications, Liruite also lists a typical range of Φ300–Φ890 mm bore and 300–8000 mm stroke.

The actual machine configuration should be determined from the customer's workpiece drawing and production requirements.

 

Where Honing Is Used in Mining Machinery

Honing is mainly used to finish the internal bore after boring or other rough machining operations.

Typical mining applications include:

Mining Equipment

Honed Component

Main Machining Requirement

Hydraulic roof support

Support cylinder

Large bore, stable geometry

Mining excavator

Boom, arm and bucket cylinders

Bore accuracy and surface finish

Underground machinery

Hydraulic cylinders

Long-stroke internal finishing

Mining equipment

Hydraulic actuators

Consistent bore dimensions

Heavy-duty mining systems

Large hydraulic cylinders

Large-bore honing

Hydraulic support systems

Cylinder tubes

Bore straightness and surface quality

The honing process can correct bore taper, roundness deviation and uneven machining marks while producing the required surface texture.

 

1. Hydraulic Roof Support Cylinder Honing

Hydraulic roof supports are widely used in underground coal mining equipment. Their cylinders operate under substantial loads and repeated extension and retraction.

For these components, the honing process normally focuses on:

Requirement

Importance in Production

Bore diameter

Controls piston and seal fit

Roundness

Helps maintain uniform sealing conditions

Straightness

Reduces uneven piston movement

Surface roughness

Affects friction and seal behavior

Honing pattern

Supports oil retention

Bore consistency

Important for batch production

Liruite designs the machine configuration according to the cylinder dimensions rather than using the same fixture and tooling arrangement for every workpiece.

For large roof-support cylinders, workpiece support and alignment become especially important.

 

2. Mining Excavator Cylinder Honing

Mining excavators use hydraulic cylinders for boom, arm, bucket and other movements.

Compared with smaller construction equipment cylinders, mining excavator cylinders can require larger bore diameters and heavier workpiece support.

Typical machining considerations include:

Item

Typical Consideration

Bore diameter

Medium to large

Cylinder length

Short, medium or long stroke

Material

Carbon or high-strength alloy steel

Workpiece weight

May require heavy-duty support

Bore tolerance

Typically specified by cylinder drawing

Surface roughness

Specified according to sealing requirements

Production

Single-piece, small batch or batch production

Fixture

V-type or customized heavy-duty fixture

For standard Liruite CNC horizontal honing machines, the published processing range is Φ50–Φ560 mm, with stroke configurations from 1000 mm to 10000 mm. Special machines can be configured for longer strokes.

 

3. Underground Mining Machinery

Underground mining machinery often uses hydraulic cylinders in confined working environments where equipment dimensions and component designs vary between machine models.

Typical applications include:

Application

Honing Requirement

Hydraulic support equipment

Stable large-bore finishing

Underground machinery

Accurate internal bore

Hydraulic lifting equipment

Long-stroke honing

Mining transport equipment

Hydraulic actuator finishing

Specialized mining equipment

Customized bore and stroke

Liruite evaluates the workpiece dimensions, loading method and required machining accuracy before determining the machine structure.

For heavy components, the fixture must provide sufficient support while keeping the cylinder aligned with the honing axis.

 

4. Large-Bore Mining Hydraulic Cylinders

Large-bore cylinders require more attention to machine rigidity, spindle torque, tooling and workpiece support.

Liruite's published mining machinery range for large-diameter applications is:

Parameter

Mining Application

Bore Diameter

Φ300–Φ890 mm

Stroke Length

300–8000 mm

Material

High-strength alloy steel

Typical Applications

Hydraulic supports, mining equipment cylinders, underground machinery

Machine Requirements

Heavy-duty fixture, strong machine bed, stable feed

For applications outside this range, Liruite can develop customized equipment.

The JWH hydraulic honing series provides a larger standard platform:

Model

Honing Depth

Processing Range

Machine Weight

JWH-1000

1000 mm

Φ50–Φ1000 mm

2600 kg

JWH-2000

2000 mm

Φ50–Φ1000 mm

3100 kg

JWH-3000

3000 mm

Φ50–Φ1000 mm

3800 kg

JWH-4000

4000 mm

Φ50–Φ1000 mm

4200 kg

JWH-5000

5000 mm

Φ50–Φ1000 mm

5800 kg

JWH-6000

6000 mm

Φ50–Φ1000 mm

6200 kg

JWH-7000

7000 mm

Φ50–Φ1000 mm

6800 kg

JWH-8000

8000 mm

Φ50–Φ1000 mm

7200 kg

JWH-9000

9000 mm

Φ50–Φ1000 mm

7500 kg

JWH-10000

10000 mm

Φ50–Φ1000 mm

8000 kg

JWH-Special

Up to 20000 mm

Φ50–Φ2000 mm

Customized

The JWH-Special configuration is intended for projects outside the standard machine range, including larger bore diameters and longer honing depths.

 

5. Long-Stroke Mining Cylinder Honing

Mining cylinders can also require long internal machining depths.

Liruite's long-stroke machine series includes:

Model

Stroke Length

Processing Range

QWH-3000S

3000 mm

Φ50–Φ560 mm

QWH-5000S

5000 mm

Φ50–Φ560 mm

QWH-8000S

8000 mm

Φ50–Φ560 mm

QWH-10000S

10000 mm

Φ50–Φ560 mm

QWH-Special

Up to 20000 mm

Customized

For mining cylinder production, stroke selection should consider not only the current cylinder length but also future product sizes.

A simple selection reference is:

Cylinder Honing Depth

Possible Liruite Configuration

≤1000 mm

QWH-1000S

≤3000 mm

QWH-3000S

≤5000 mm

QWH-5000S

≤8000 mm

QWH-8000S

≤10000 mm

QWH-10000S

10000–20000 mm

Special/customized configuration

The actual selection should include machining allowance, tooling length and required honing travel.

 

6. Machine Rigidity for Mining Cylinder Honing

High-strength alloy steel and large workpieces place greater demands on the machine structure.

For mining applications, Liruite considers the following machine elements:

Machine Element

Main Function

Machine bed

Supports the complete machining system

Guide rail

Controls reciprocating movement

Spindle system

Provides rotational honing movement

Servo feed

Controls honing head expansion

Fixture

Supports and aligns the workpiece

Honing tool

Controls internal surface finishing

Cooling system

Removes heat and machining debris

Filtration system

Removes abrasive particles from coolant

For large-bore applications, the machine structure, fixture and tooling should be selected as one system rather than separately.

 

7. Spindle System

The spindle controls the rotational movement of the honing tool.

Liruite's CNC horizontal honing machine specifications include:

Spindle Parameter

Specification

Spindle Motor

5.5 kW

Spindle Speed

17–180 rpm

Speed Control

Stepless

Drive System

Spindle gearbox + motor

Application

CNC horizontal honing

For heavier hydraulic applications, Liruite's hydraulic honing machine configuration uses a 7.5 kW spindle motor.

For large mining cylinders, the final spindle configuration should be matched to bore diameter, material, honing allowance and tooling.

 

8. Servo Feed System

The honing head feed system controls the expansion of the honing stones.

Liruite's published CNC machine parameters include:

Feed Parameter

Specification

Feed Motor

1 kW

Honing Head Control

Servo motor + gear rack

Feed Control Accuracy

0.001 mm

Control System

Liruite honing control system

Controlled feed is particularly important when mining cylinders are produced in batches because it helps maintain consistent bore dimensions between workpieces.

 

9. Reciprocating System

The honing head moves along the cylinder bore during machining.

Liruite's published CNC honing machine parameters include:

Reciprocating Parameter

Specification

Reciprocating Motor

4.5 kW

Reciprocating Speed

0–40 m/min

Stroke Control

Servo motor + linear guide rail

Stroke Positioning Accuracy

0.1 mm

For long mining cylinders, stable reciprocating movement is important because the honing head may travel several meters during one machining cycle.

 

10. Cooling and Filtration

Honing generates fine abrasive particles. Coolant filtration therefore becomes an important part of the machine configuration.

Liruite equipment uses multi-stage filtration systems, with published configurations including:

Filtration Item

Liruite Configuration

Main Filtration

Magnetic filtration / multi-stage filtration

Filtration System

Three-level filtration on relevant models

Oil Tank

500 L on published CNC configuration

Return Oil Flow

50 L/min

Optional Paper Filter

5–20 μm

Optional Oil Cooler

0–30°C

For long machining cycles and large cylinders, coolant circulation and filtration should be considered during the initial machine design.

 

11. Fixture Design for Mining Machinery

Fixture selection depends heavily on cylinder diameter, length and weight.

Liruite's published hydraulic honing machine configuration includes a V-type fixture covering approximately 260–1400 mm.

The fixture requirements can be summarized as:

Workpiece Condition

Fixture Consideration

Small/medium cylinder

Standard V-type fixture

Large-bore cylinder

Larger support range

Long cylinder

Multiple support points

Heavy cylinder

Reinforced workpiece support

Special geometry

Customized fixture

High-volume production

Faster positioning and clamping

For mining cylinders, the fixture must support the workpiece without creating unnecessary deformation or alignment errors.

 

12. Bore Accuracy and Surface Finish

The required bore quality depends on the cylinder design, piston, sealing system and application.

Liruite's published CNC honing machine specifications include:

Quality Parameter

Typical Liruite Specification

Dimensional Accuracy

H6–H8

Surface Roughness

Ra0.1–Ra0.4 μm

Typical Material Reference

Ordinary steel

Processing Type

Internal bore honing

For mining hydraulic cylinders, the final requirement should always be taken from the customer's engineering drawing. The material, initial bore condition, machining allowance and honing tool will affect the final result.

 

13. Mining Machinery Honing Machine Selection

Before selecting a machine, Liruite recommends collecting the following workpiece information.

Category

Required Information

Bore

Minimum and maximum bore diameter

Length

Cylinder length / honing depth

Material

Carbon steel, alloy steel or other material

Hardness

Workpiece hardness

Weight

Maximum workpiece weight

Tolerance

Required bore tolerance

Surface

Required surface roughness

Geometry

Roundness, straightness and cylindricity requirements

Production

Daily/monthly production

Tooling

Existing or required honing tooling

Loading

Crane, forklift or automatic loading

Factory

Available installation space and power

This information allows Liruite to determine whether a standard CNC horizontal machine, hydraulic honing machine, long-stroke machine, large-bore machine or customized system is appropriate.

 

Mining Machinery Honing Machine Configuration Reference

Application

Bore Range

Stroke Range

Material

Main Machine Consideration

Hydraulic roof support

Φ63–890 mm

300–8000 mm

High-strength alloy steel

Heavy-duty fixture

Mining excavator cylinder

Φ300–890 mm typical for large-bore applications

300–8000 mm

Alloy steel

Large-bore honing

Underground machinery cylinder

Φ63–890 mm

300–8000 mm

High-strength alloy steel

Stable support and feed

Long mining cylinder

Φ50–560 mm standard range

5000–10000 mm

Carbon/alloy steel

Long-stroke machine

Large hydraulic cylinder

Φ50–1000 mm

Up to 10000 mm

Customized

JWH hydraulic honing

Special large cylinder

Up to Φ2000 mm

Up to 20000 mm

Customized

Special/customized machine

The first four rows reflect Liruite's published mining application ranges; the final two refer to the available JWH hydraulic honing platform.

 

Liruite Mining Machinery Honing Solution

A typical mining cylinder honing process can be organized as:

Process Stage

Main Work

1. Rough machining

Boring / internal-hole preparation

2. Inspection

Check bore diameter and geometry

3. Loading

Position cylinder on fixture

4. Alignment

Establish honing axis

5. Rough honing

Remove remaining machining allowance

6. Fine honing

Achieve final bore size and surface condition

7. Cleaning

Remove honing debris and coolant

8. Inspection

Check bore diameter, roughness and geometry

9. Final assembly

Proceed to cylinder assembly

The exact process parameters depend on the workpiece material, initial bore condition, allowance and required final quality.

 

Liruite Mining Machinery Honing Machine Manufacturer

Liruite Automation Equipment supplies CNC horizontal honing machines, hydraulic honing machines, deep-hole honing machines, long-stroke honing machines and customized honing equipment.

For mining machinery manufacturers, the equipment can be configured around:

Customer Requirement

Liruite Response

Large bore

Large-diameter honing configuration

Long stroke

Extended machine bed and long-stroke system

Heavy cylinder

Heavy-duty fixture and support

High-strength steel

Appropriate honing tooling and process

Tight bore tolerance

Servo feed and controlled honing

Long machining cycle

Cooling and multi-stage filtration

Special cylinder size

Customized machine

Multiple cylinder sizes

Adjustable tooling and fixture configuration

Mining cylinder manufacturers can provide Liruite with the workpiece drawing, bore diameter, honing depth, material, weight, tolerance and production volume for machine evaluation.

The machine is then configured around the actual cylinder rather than selected only by nominal bore diameter or stroke.

Home

Phone

E-mail

Inquiry