Precision Honing for Aircraft Landing Gear, Hydraulic Actuators and MRO Components
Aircraft maintenance is different from new aircraft component manufacturing.
A maintenance facility may receive landing gear cylinders from different aircraft models, hydraulic actuators with different bore dimensions, and components with different levels of wear. Some parts need only a small amount of material removal. Others require substantial bore restoration after long-term service.
For Liruite, aircraft maintenance honing is mainly about restoring the internal bore to the required dimensional and surface condition without removing unnecessary material.
Our honing machines can be configured for:
- Aircraft landing gear cylinders
- Landing gear struts and sleeves
- Hydraulic actuators
- Aerospace hydraulic cylinders
- Precision tubes
- Pump and valve components
- Aircraft component repair
- Landing gear overhaul
- Hydraulic cylinder refurbishment
The machine configuration depends on the actual component, bore diameter, honing length, repair allowance, material and inspection requirements.
1. Where Honing Fits Into Aircraft Maintenance
Landing gear and hydraulic components are exposed to repeated loads during service.
Over time, the internal bore can develop:
- Localized wear
- Taper
- Ovality
- Scratches
- Scoring
- Surface damage
- Uneven machining marks
- Dimensional deviation
The component may still be structurally usable, but the bore can no longer provide the required piston movement, sealing condition or surface lubrication.
Honing is used after inspection and preliminary machining to bring the bore back toward the specified geometry.
A typical maintenance sequence is:
Component inspection → Disassembly → Cleaning → Dimensional inspection → Pre-machining if required → Honing → Final inspection → Reassembly
The exact sequence depends on the aircraft component and maintenance procedure.
2. Aircraft Landing Gear Maintenance
Landing gear is one of the main aerospace maintenance applications for Liruite honing equipment.
Typical components include:
- Main landing gear cylinders
- Nose landing gear cylinders
- Shock struts
- Hydraulic actuators
- Landing gear sleeves
- Hydraulic cylinder barrels
These components can have relatively long internal bores, making machine rigidity, stroke control and workpiece support important.
For aircraft landing gear maintenance applications, Liruite's reference range is:
|
Parameter |
Typical Range |
|
Bore Diameter |
Φ50–Φ300 mm |
|
Honing Length / Stroke |
500–3000 mm |
|
Honing Force Capacity |
1–20 t |
|
Material |
High-strength alloy steel / aerospace materials |
|
Machine Type |
CNC horizontal honing |
|
Application |
Manufacturing, overhaul and repair |
These figures are application reference values from Liruite's aircraft landing gear honing solution. The final machine configuration is determined from the customer's component drawing and repair process.
3. Common Bore Problems During Landing Gear Overhaul
A landing gear cylinder does not necessarily need to be replaced when the internal bore develops wear.
The maintenance decision depends on the actual condition of the component and the applicable repair specification.
From a machining perspective, common bore conditions include:
Bore Wear
Repeated piston movement can produce localized wear along the working area.
Taper
The bore may have different diameters at different positions along its length.
Ovality
Uneven loading can result in deviation from a circular cross-section.
Scoring
Damage caused by contamination, surface defects or operating conditions can leave longitudinal marks on the bore.
Surface Degradation
The original surface pattern may no longer provide the required lubrication and sealing characteristics.
Honing can remove a controlled amount of material and correct these problems when sufficient repair allowance remains.
4. Why Horizontal Honing Is Suitable for Aircraft Maintenance
Many landing gear and hydraulic actuator components are long cylindrical parts.
For these components, horizontal honing provides a practical arrangement for supporting the workpiece while the honing head travels through the bore.
The process combines:
Spindle rotation + axial reciprocation + controlled radial expansion
The abrasive stones contact the bore surface while the tool moves through the working length.
This allows Liruite equipment to address:
- Bore diameter
- Roundness
- Cylindricity
- Straightness
- Surface roughness
- Surface pattern
Liruite's horizontal honing equipment is intended for long tubes, hydraulic cylinders, aircraft landing gear sleeves and other deep internal bores.
5. Aircraft Hydraulic Actuator Repair
Hydraulic actuators are another important maintenance application.
Actuator cylinders may be removed from service because of:
- Bore wear
- Seal leakage
- Surface scoring
- Dimensional deviation
- Corrosion
- Poor piston movement
After inspection, the bore may require controlled material removal before the cylinder can be returned to service.
For actuator repair, Liruite focuses on the relationship between:
|
Machining Factor |
Maintenance Requirement |
|
Bore Diameter |
Recover required dimensional range |
|
Roundness |
Correct localized geometric deviation |
|
Cylindricity |
Maintain consistent bore geometry |
|
Surface Roughness |
Meet component specification |
|
Honing Length |
Cover complete working area |
|
Repair Allowance |
Avoid unnecessary material removal |
|
Tooling |
Match bore size and material |
|
Fixture |
Hold component securely |
|
Coolant / Oil |
Maintain stable honing conditions |
Liruite's CNC honing information gives H6–H8 as a typical accuracy range for hydraulic-cylinder applications and Ra0.1–Ra0.4 μm as a typical surface roughness range, depending on the process. These values should not be applied automatically to every aircraft component; the aircraft component drawing and approved repair specification remain the controlling requirements.
6. Bore Restoration After Aircraft Component Wear
Aircraft maintenance shops often deal with used components rather than new parts.
This changes the machining process.
A new component usually has a known starting dimension and controlled machining allowance.
A repaired component may have:
- Uneven wear
- Unknown local damage
- Existing taper
- Previous repair marks
- Corrosion
Different material removal requirements along the bore
Therefore, the first machining step should be measurement.
Bore Inspection
Before honing, the maintenance shop can determine:
- Minimum bore diameter
- Maximum bore diameter
- Wear distribution
- Taper
- Ovality
- Surface condition
- Remaining repair allowance
The result determines whether the component can be restored through honing and how much material should be removed.
This is one reason Liruite does not select a maintenance honing machine from bore diameter alone.
7. Honing Process for Aircraft Maintenance
Step 1 - Component Inspection
The landing gear cylinder or actuator is inspected after disassembly and cleaning.
The maintenance team determines the existing bore condition and compares it with the required repair dimensions.
Step 2 - Fixture Setup
The component is positioned and secured on the honing machine.
For long cylinders, proper support is important.
The fixture must prevent unnecessary movement while allowing the honing tool to remain aligned with the bore.
Liruite can customize fixtures according to the component geometry.
Step 3 - Rough Honing
Where the repair allowance permits, rough honing removes the damaged surface layer and starts correcting:
Taper
Ovality
Local wear
Surface damage
The material removal amount depends on the actual bore condition.
Step 4 - Finish Honing
Finish honing brings the bore toward its final dimensional and surface requirements.
The process controls:
Final bore diameter
Surface roughness
Geometry
Honing pattern
For hydraulic components, the resulting surface structure must be suitable for lubrication and seal operation.
Step 5 - Final Inspection
After honing, the component is cleaned and inspected.
Typical checks include:
Bore diameter
Roundness
Cylindricity
Surface roughness
Bore cleanliness
Dimensional consistency
The actual inspection method and acceptance criteria are determined by the applicable aircraft component documentation and maintenance procedures.
8. Liruite Honing Machine Configuration for Aircraft MRO
Aircraft maintenance facilities often need a machine that can process different components instead of one dedicated production part.
Liruite can configure the machine around the customer's repair range.
A representative hydraulic honing configuration includes:
|
Machine System |
Liruite Configuration |
|
Machine Type |
CNC horizontal honing |
|
Spindle Motor |
7.5 kW configuration |
|
Reciprocating Motor |
4.5 kW |
|
Feed Motor |
1 kW |
|
CNC System |
JW-2 special honing system |
|
Touchscreen |
Kunlun industrial touchscreen |
|
Motor Drivers |
Schneider configuration |
|
Bearings |
NSK |
|
Honing Tool |
Liruite |
|
Fixture |
Customized |
|
Cooling / Filtration |
Three-stage filtration |
|
Oil Tank |
500 L configuration |
|
Cooling Flow |
>50 L/min |
These are representative Liruite equipment configurations rather than a fixed aircraft-MRO machine specification. The actual configuration is selected according to bore size, machining length, component weight, material, repair allowance and process requirements.
9. Honing Range for Aircraft Maintenance
Liruite offers different machine ranges for different component sizes.
|
Machine Series |
Reference Bore Range |
Reference Stroke |
|
QWH Series |
Φ50–Φ560 mm |
1,000–10,000 mm |
|
QWH Special |
Customized |
Up to 20,000 mm |
|
JWH Series |
Φ50–Φ1000 mm |
1,000–10,000 mm |
|
JWH Special |
Φ50–Φ2000 mm |
Customized |
|
Aircraft Landing Gear Application |
Φ50–Φ300 mm |
500–3000 mm |
The aircraft landing gear range is a specific application reference. The broader QWH and JWH ranges are machine-series capabilities and should not be interpreted as requirements for every aircraft maintenance project.
10. Different Aircraft MRO Requirements
Aircraft maintenance companies may have very different machining requirements.
Landing Gear MRO
Main components:
- Landing gear cylinders
- Shock struts
- Actuator cylinders
- Sleeves
Main machining concern:
Long internal bores and controlled bore restoration.
Hydraulic Component MRO
Main components:
- Hydraulic actuators
- Cylinder barrels
- Valve bodies
- Pump components
Main machining concern:
Dimensional accuracy and surface condition.
Military Aircraft Maintenance
Maintenance facilities may process several component designs and materials.
Main machining concern:
Flexible tooling and repeatable repair processes.
Commercial Aircraft MRO
The machine may be used for repeated overhaul work.
Main machining concern:
Stable machining results and efficient setup between different component models.
11. Horizontal and Vertical Honing for Aircraft Maintenance
Not every aircraft component requires a horizontal machine.
The component geometry determines the appropriate machine arrangement.
|
Component |
Preferred Configuration |
Reason |
|
Long landing gear cylinder |
Horizontal |
Long bore and stroke |
|
Long actuator cylinder |
Horizontal |
Stable support over length |
|
Precision tube |
Horizontal |
Deep internal bore |
|
Short pump body |
Vertical / Horizontal |
Depends on geometry |
|
Valve body |
Vertical |
Compact component |
|
Bearing bore |
Vertical |
Short precision bore |
|
Small aerospace component |
Vertical |
Easier loading and automation |
Liruite's vertical honing equipment is also used for aerospace components such as hydraulic cylinders, pump bodies and precision bearing applications.
For an MRO workshop handling many component types, a mixed equipment strategy can therefore be more practical than using one machine for every part.
12. Cooling and Filtration During Repair Honing
Used aircraft components can introduce additional contamination into the honing process.
Residual particles, previous machining debris and abrasive material must be controlled.
Liruite honing machines can use a multi-stage filtration system with:
|
Item |
Liruite Reference |
|
Filtration |
Three-stage |
|
Flow Rate |
>50 L/min |
|
Oil Tank |
500 L |
|
Magnetic Filtration |
Available |
|
Oil Cooling |
Optional |
|
Temperature Control |
Available |
Stable honing oil circulation helps maintain the machining condition during long repair cycles.
For aerospace MRO, this is particularly relevant when a shop needs repeatable surface results across different components.
13. Tooling for Aircraft Component Repair
Aircraft MRO rarely involves one single bore size.
A landing gear workshop may process several aircraft models and several cylinder dimensions.
Liruite can configure tooling around:
- Bore diameter
- Bore length
- Material
- Repair allowance
- Required surface roughness
- Honing stock
- Component geometry
The honing head and abrasive specification should be selected from the actual material and process.
For this reason, a maintenance shop should provide the component drawing and existing machining data when requesting a machine configuration.
14. Aircraft Maintenance Honing Machine Selection
For an aircraft MRO facility, the main selection questions are:
15. Liruite Solution for Aircraft Maintenance Facilities
Liruite approaches an aircraft maintenance project from the component and repair process.
We evaluate:
Component drawing → Existing bore condition → Repair allowance → Final bore requirement → Machine structure → Tooling → Fixture → Cooling and filtration → Inspection
For landing gear cylinders, the main focus is usually long-bore horizontal honing.
For smaller aerospace components, a vertical configuration may be more appropriate.
For a mixed MRO workshop, Liruite can develop a customized machine configuration according to the customer's component range.
Our equipment can be configured for:
- Aircraft landing gear overhaul
- Landing gear cylinder repair
- Hydraulic actuator refurbishment
- Aerospace hydraulic component repair
- Precision tube restoration
- Bore damage correction
- Component remanufacturing
16. Aircraft Maintenance Honing Parameters at a Glance
|
Item |
Liruite Reference |
|
Landing Gear Bore |
Φ50–Φ300 mm |
|
Landing Gear Honing Length |
500–3000 mm |
|
Landing Gear Honing Force |
1–20 t |
|
QWH Standard Bore Range |
Φ50–Φ560 mm |
|
QWH Standard Stroke |
1,000–10,000 mm |
|
JWH Bore Range |
Φ50–Φ1000 mm |
|
JWH Standard Stroke |
1,000–10,000 mm |
|
Special Large-Bore Capacity |
Up to Φ2000 mm |
|
Customized Long Stroke |
Up to 20,000 mm |
|
Typical Hydraulic Accuracy |
H6–H8 |
|
Typical Surface Roughness |
Ra0.1–Ra0.4 μm |
|
Spindle Motor Configuration |
7.5 kW |
|
Reciprocating Motor |
4.5 kW |
|
Feed Motor |
1 kW |
|
Filtration Flow |
>50 L/min |
|
Oil Tank |
500 L |
|
CNC System |
JW-2 |
The figures above combine Liruite's aircraft-maintenance application references with its machine-series specifications. They are not a single standard aircraft MRO machine specification. Final values must be confirmed against the customer's component and repair requirements.
17. Request an Aircraft Maintenance Honing Machine
For an aircraft maintenance or landing gear overhaul project, Liruite recommends providing the actual component information before selecting the machine.
Please provide:
- Component drawing
- Aircraft component type
- Bore diameter
- Bore length
- Material
- Original bore size
- Current measured bore size
- Maximum wear
- Repair allowance
- Final dimensional requirement
- Surface roughness requirement
- Component weight
- Annual repair quantity
- Number of component models
Based on this information, Liruite can evaluate the machine size, stroke, spindle system, honing head, abrasive tooling, fixture, cooling system and CNC configuration.
Liruite Automation Equipment
CNC Honing Machines for Aircraft Landing Gear Overhaul, Hydraulic Actuator Repair and Aerospace Component Maintenance
